Beautiful Bow!

Ok so here goes...If you have any other questions, please email me!

You need a 12 X 12 sheet of designer paper. The new Stampin Up! christmas designer paper is so nice! Cut 12 pieces at 7" X 1", 4 pieces of 6" X 1", and 1 piece of 5" X 1".

Fold them so that you can see only the side that you want. The ends should be over-lapping a bit and tape together.

Do this to all 12 of the 7" X 1" pieces

Tape 2 together, ends just overlapping a tiny bit.

Now glue down another duo on top and fasten with a brad for added stability.

Repeat these steps until you have used up all 12 of the 7" X 1" pieces

Using Sticky strip, stick all the duos inside each other.

Now take your 4-6"x 1" pieces and repeat what you just did with the longer pieces.

Now take your remaing piece of paper and make it into a loop.

Tape it into the middle. Squish it down good so it sticks~you might want to use sticky strip.

And Voila~A Beautiful Bow!